Internal Window Trims Kit for Land Rover Defender 90/110 - 200TDI, 300TDI & TD5 - Masai Covered

SKU: IWT-90TD5-MAS
£478.80
Price Includes 20% VAT (20%) £79.80
Optional extras advised. Please read full description.
Vehicle Type?
Trim Colour
Please choose
In stock
1
Save this product for later
Have questions?
Share this product with your friends
Internal Window Trims Kit for Land Rover Defender 90/110 - 200TDI, 300TDI & TD5 - Masai Covered
Product Details
Manufacturer: Masai
Sold As: Defender 90 (4 piece kit), Defender 110 (8 piece kit)

Masai Covered Internal Window Trims Kit for Defender 90/110 200TDI, 300TDI & TD5

Spruce up the interior of your Defender - 200TDI/300TDI/TD5 by fitting an internal window trim kit. Including rear side window and quarter light trims - 4 pieces in total - Masai internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.

These kits are supplied pre-covered with fabric to suit most Land Rover interiors.

Note: This product will show as IN STOCK to allow you to order, however there might be a 4-6 week lead time. Your chosen colour choice could be available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.

  • 90 KIT: Rear side window internal trims AND quarter light internal trims (4 pieces)
  • 110 KIT: Rear Side window internal trims, quarter light internal trims, 2nd door trim and front door seat belt trim. (8 pieces) AWAITING IMAGES
  • Included: Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cutouts, that allow you to stick onto the fir trees to match the colour to the Internal trims. (See photo in the thumbnails above) - These come supplied for ALL 9 different colours!
  • Manufactured by Masai, covered in high-quality fabric used on our new Defender 90/110 Headlinings.
  • Made of high-quality GRP.
  • DIY installation. (Fitting service available.)
  • Ideal for replacing worn trim kits or converting a panel van into a County spec.
  • Equivalent to official Land Rover part numbers MWC5832LOY, MWC8910LNP, ENV500170LOY, MWC8911LNP
  • Fits 200tdi/300tdi/TD5 Land Rover Defenders from 1985 to 2006. (BUT NOT the recent 70mm lower radius TDCi/Puma windows with forward-facing seats).
  • Top and bottom corner radius is 50mm.
  • FITTING SERVICE AVAILABLE - CALL US FOR A QUOTE.

Download Internal Trim Fitting Instructions.

We highly recommend this extra:

(See "You May Also Like" section below to add any extras to your basket).

Pair of Internal Window Trims Finisher Posts - please pick a colour

Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.

You may also be interested in these optional extras:

Set of Trim Fitting Spacers for vehicles with Inward Facing Rear Seats

If you have Inward Facing Rear Seats. Spacers enable the safe securing of inward-facing seats through the interior window trim on TD5 model Defenders (1987-2006). Made from black plastic they replace the original metal parts providing support for bolts that secure the seats to the vehicle frame. The support provided by the spacer secures the internal trim and ensures no distortion or wear and tear as the bolts are tightened. The softer plastic material causes less wear and tear to the interior trim and reduces internal vibration. Each interior window trim requires 5 spacers and so this convenient kit enables you to undertake the complete job with minimum fuss.

Station Wagon Conversion Lower Retaining Clips

If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3276.

Interior LED Vehicle Strip Lights

Enhance and brighten the interior of your vehicle with low power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.

LED and HID vehicle lights

Work lights / driving lights / LED spot lights / flood lights / HID headlights / LED light bars and interior LED lights

MASAI LIGHTS stocks a wide selection of LED and HID vehicle lights / work lights / driving lights / LED spot lights / flood lights / HID Headlights / LED Light Bars and interior LED Lights. We have high-luminosity LED lights and ultra bright Xenon HID lights, IP65 and IP67 compliant. Some have housings made of die-cast aluminium and others are ABS plastic. Most have wide voltage ranges.

18 to 300 watts and up to 24,000 lumens LEDs. High intensity Epistar LEDs are energy-efficient compared to filament or halogen lights and CREE LEDs are even more powerful and energy-efficient than Epistar LEDs. If you're running additional lights off a switched off engine, then high-efficiency HID and LED lights will drain the battery slower than traditional filament or halogen lights.

About Masai

Automotive Engineering since 1953

Masai is a retail brand name of our design and manufacturing company Omega Automotive Ltd, owned and managed by the Kuman family based in England and Turkey. Since 1953, a passion for automotive engineering has flowed through 3 generations of the Kuman family.

We are specialists in Windows, Metal Fabrication, Lighting, Vehicle Instrumentation, Suspension, Rubber and Cooling. We also manufacture and supply to many automotive companies around the world. See all our products on our other website at Masai.co. Or stay on this website and see them here.

We have facilities in two of Europe’s long established centres of automotive engineering - Istanbul, Turkey - manufacturing, and The Midlands UK (Lichfield) - our Northern European distribution centre.

There's been a growing demand over recent years for vehicle lighting which consumes less power and is far longer lasting than conventional filament bulbs.

LED lights very much meet that need, and for the same power consumption will produce greater luminosity and a whiter light. Recognising that, we have sourced high-quality LED and HID vehicle lights from around the world and will be bringing further ranges over the coming years.

High intensity Epistar LEDs are energy-efficient compared to filament or halogen lights and CREE LEDs are even more powerful and energy-efficient than Epistar LEDs.

If you’re running additional lights off a switched off engine, then high-efficiency HID and LED lights will drain the battery slower than traditional filament or halogen lights.

The circular light you see below is a 4-inch LED work light producing 2,150 lumens at 27 watts with 9 Epistar LEDs. It can be fitted to a wide range of commercial and domestic vehicles.

Masai LED and HID vehicle lights
Masai LED and HID vehicle lights

+44 (0)1543 254507

info @ masai.co

OPEN: Monday to Friday 9:00am - 5:30pm

CLOSED Saturday & Sunday

Please feel free to telephone us if you are unsure of which lights to buy or have any other enquiry.

Masai/Omega Automotive Ltd,
Unit 5b Eastern Park, Eastern Avenue,
Lichfield, Staffordshire,
WS13 7SY, England

Checkout our support sites:

Land Rover Defender accessories and parts at; www.masai4x4.com

Vehicle windows at www.masaiwindows.com