Headlining / Roof Lining Kit for Land Rover Defender 110 (4pcs Kit)

RHL110-SW-BLK
£1,078.20
In stock
1
Product Details
Manufacturer: Masai
Application: Replace old Headlining
Suitable Vehicle: Defender 110 Station Wagon / Hard Top
Sold As: 4 Piece Kit + Fittings
Colour: 9 Different Colours

Head Lining / Roof Lining KIT for Land Rover Defender 110 Station Wagon / Hardtop (4pcs Kit)

NOTE: This product will remain IN STOCK to allow you to order, however there *may* be a 4-6 week lead time. Your chosen colour choice is most likely available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.

The Roof Lining Kit includes:

  • Front Piece (Not for Defenders with Sunroof, although hole can be easily cut out)
  • Middle Piece with Alpine Window Cut Outs
  • Rear Piece
  • Telephone Piece
  • 20x Fir Tree Clips - to be fitted into the predrilled holes on the headlining for Defender PUMAs, if your Defender is pre 2007, then you will need to make new holes to match the ones in your roof.
  • Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cutouts, that allow you to stick onto the fir trees to match the colour to the headlining. (See photo in the thumbnails above) These come supplied with ALL 10 different colours!
  • (Optional Extra) - Pair of Sun Visors - Complete new sunvisors covered to match your headlining colour choice.
  • (Optional Extra) - Pair of Alpine Window Inserts - This is only for Defenders with no alpine windows in the roof. It will cover the gap on the inside of the roof.
  • (Optional Extra) - Pair of Windscreen Finishers/ A-Post Trim Covers to match your headlining colour choice.

Our Defender 110 Roof Lining is manufactured in-house by well experienced Masai® craftsmen in the automotive trimming business. All our NEW roof lining shells are produced exactly to the Land Rover roof lining shape. Made from special GRP, which gives a much better rigidity than the Land Rover thermoplastic biscuit material. This will also provide a much longer lasting roof lining, and will no longer absorb any roof condensation that causes the common problem of sagging over time. The Ebony Black Alston lining has a plush suede-like finish for that extra touch of style and is hand glued to each individual roof section.

  1. First, remove your old head lining, the telephone piece first, then the back section, the middle section, all interior lights, the sun visors, the rear-view mirror then the front section.
  2. When fitting our head lining, start from the front and work backwards.
  3. Fit the front piece using the fir trees provided in your kit plus interior light.
  4. Fit the middle piece (with alpine cut outs)
  5. Fit the rear piece and interior light.
  6. Fit the telephone piece.

If your existing holes don’t match up with our head lining, then you will need to drill additional holes (I’d suggest you drill the holes in the headlining to match your Defender, instead of drilling in the Defender roof to match our headlining). We purposefully covered all the pre-drilled holes with material for this reason.

Defenders have changed a lot over the years and Land Rovers kept messing with the holes locations!

If you are upgrading your Defender from a Van to a Station Wagon we would recommend that you purchase the interior light as the new roof lining will have a hole cut out for it. The interior light fitting and its bracket will also help secure the roof lining properly.

You may also need a pair of grab handles to help secure the telephone piece above the rear door.

If you would like some help we offer a fitting service for this product, please call us on 01543 254507 for a quote.



Genuine Land Rover Part Numbers

The Land Rover part numbers for the 110 BLACK version are:

  • LR077719 – Front Headlining section (No Sunroof cut out);
  • LR063676 – Middle Headlining section;
  • LR063679 - Back Headlining section;
  • LR063680 - Telephone Piece
Save this product for later

LED and HID vehicle lights

Work lights / driving lights / LED spot lights / flood lights / HID headlights / LED light bars and interior LED lights

MASAI LIGHTS stocks a wide selection of LED and HID vehicle lights / work lights / driving lights / LED spot lights / flood lights / HID Headlights / LED Light Bars and interior LED Lights. We have high-luminosity LED lights and ultra bright Xenon HID lights, IP65 and IP67 compliant. Some have housings made of die-cast aluminium and others are ABS plastic. Most have wide voltage ranges.

18 to 300 watts and up to 24,000 lumens LEDs. High intensity Epistar LEDs are energy-efficient compared to filament or halogen lights and CREE LEDs are even more powerful and energy-efficient than Epistar LEDs. If you're running additional lights off a switched off engine, then high-efficiency HID and LED lights will drain the battery slower than traditional filament or halogen lights.

About Masai

Automotive Engineering since 1953

Masai is a retail brand name of our design and manufacturing company Omega Automotive Ltd, owned and managed by the Kuman family based in England and Turkey. Since 1953, a passion for automotive engineering has flowed through 3 generations of the Kuman family.

We are specialists in Windows, Metal Fabrication, Lighting, Vehicle Instrumentation, Suspension, Rubber and Cooling. We also manufacture and supply to many automotive companies around the world. See all our products on our other website at Masai.co. Or stay on this website and see them here.

We have facilities in two of Europe’s long established centres of automotive engineering - Istanbul, Turkey - manufacturing, and The Midlands UK (Lichfield) - our Northern European distribution centre.

There's been a growing demand over recent years for vehicle lighting which consumes less power and is far longer lasting than conventional filament bulbs.

LED lights very much meet that need, and for the same power consumption will produce greater luminosity and a whiter light. Recognising that, we have sourced high-quality LED and HID vehicle lights from around the world and will be bringing further ranges over the coming years.

High intensity Epistar LEDs are energy-efficient compared to filament or halogen lights and CREE LEDs are even more powerful and energy-efficient than Epistar LEDs.

If you’re running additional lights off a switched off engine, then high-efficiency HID and LED lights will drain the battery slower than traditional filament or halogen lights.

The circular light you see below is a 4-inch LED work light producing 2,150 lumens at 27 watts with 9 Epistar LEDs. It can be fitted to a wide range of commercial and domestic vehicles.

Masai LED and HID vehicle lights
Masai LED and HID vehicle lights

+44 (0)1543 254507

info @ masai.co

OPEN: Monday to Friday 9:00am - 5:30pm

CLOSED Saturday & Sunday

Please feel free to telephone us if you are unsure of which lights to buy or have any other enquiry.

Masai/Omega Automotive Ltd,
Unit 5b Eastern Park, Eastern Avenue,
Lichfield, Staffordshire,
WS13 7SY, England

Checkout our support sites:

Land Rover Defender accessories and parts at; www.masai4x4.com

Vehicle windows at www.masaiwindows.com